Faema CARISMA A-1, Использование и установка

Страница: 19 / 29

*
SET
1
To access the programming
menu, press and hold the
center key OK for at least 4
seconds.
An asterisk and the word SET
appear on the display.
2
Press the center key OK to
pass to the phase for setting
the frothed steam key.
Note: Each time the center
programming key OK is
pressed, the next screen
appears.
4
Use the + / - keys on the side
to set the boiler temperature
(value with large characters).
3
Instant boiler temperature
Set temperature
C o n f i r m a n d e x i t t h e
p r o g r a m m i n g m e n u b y
pressing the center key OK .
10
In the Quicksteam versions, the programming phase includes setting the
boiler temperature and the temperature for the steam keys:
5. Setting the boiler temperature/steam keys
Version: Carisma A Quicksteam (
wands: water - Quicksteam
)
5 7 6
Use the + / - keys on the side to set
the stop dispensing temperature
(40÷85°C).
The presence of reference marks
below the temperature follows this
logic:
1 MARK Setting phase
Stop temperature
Dispensing
2 MARKS Setting phase
Start air temperature
3 MARKS Setting phase
Stop air temperature
01 = Frothed key
Stop
dispensing
temperature
Reference
Mark
Press the center key OK and
use the + / - keys on the side to
set the start air temperature
(compressor working).
Press the center key OK and
use the + / - keys on the side
to set the stop air temperature
(compressor not working).
Press the center key OK and then use the + / - keys on the side
to set the start air and stop air temperatures. The hot steam key
must be set at the same temperature.
Start air
temperature
Stop air
temperature
Press the center key OK and
proceed to set the hot steam
key.
02 = Hot key
Use the + / - keys on the side to set
the stop dispensing temperature key
(40÷85°C).
Stop
dispensing
temperature
9
Start air
temperature
Stop air
temperature
8
*
SET
36
English
English