![background image](http://html1.mh-extra.com/html/fadini/dardo-430/dardo-430_instruction-manual_3186265021.webp)
FIXING TO GATE POST
FIXING TO GATE
!
!
Pic. 9
Pic. 10
Screw the locknut: avoid overtightening and
undo half a turn approx. in order to allow for
a smooth rotation without friction
Remove the rear cap protecting the electrical connections, located at the back of the operator.
Make the opertor rear fork-like bracket to fit the gate post fixing plate on to the central hole (lateral holes are provided to adjust
the rear fixing in case A and B distances might be wrong).
Open the gate by hand and bring it close to the operator. Swing this one on to the front bracket so that the fastening pin fits into
the bush of the front fixing plate, then tighten the locking screw, avoid overtightening.
Locking screw
IMPORTANT:
RECOMMENDED.
PUT SOME GREASE ON THE
FASTENING PIN
!
IMPORTANT:
IT IS RECOMMENDED THAT
SOME GREASE BE PUT ON THE BOLT AND
THE SURFACE OF THE FIXING PLATE
electromechanical operator for swinging gates
DARDO 430
DARDO 430
English
GREASE
GREASE
21
Содержание DARDO 430
