DECATHLON _
CODE SEA 83
.
Instruction Manual
12
Remove covering.
When cutting through the covering to re-
move it, cut with only enough pressure
to only cut through the covering itself. Cutting
into the balsa structure may weaken it.
Draw center line.
Throttle servo arm.
Elevator servo.
Elevator servo.
Rudder servo.
Epoxy.
INSTALLING THE HORIZONTAL
STABILIZER.
Adjustable Servo
connector.
Servo arm.
Loctite secure.
1 pcs.
Remove covering.
2) Secure the servos with the screws pro-
vided with your radio system.
INSTALLING THE FUSELAGE SERVO.
1) Install the rubber grommets and brass
collets onto the throttle servo. Test fit the servo
into the aileron servo mount.
Because the size of servos differ, you
may need to adjust the size of the precut open-
ing in the mount. The notch in the sides of the
mount allow the servo lead to pass through.
THROTTLE SERVO ARM INSTALLATION.
Install adjustable servo connector in the servo
arm .
Elevator servo.
Rudder servo.
Elevator servo.
Throttle servo.
Epoxy.
