&
5HVSRQVLEOH
)RUHVW0DQDJHPHQW
Introduction
Design
Design, shop drawings and development by Factory Furniture Ltd.
Manufacture
Factory Furniture manufactured components. Products are assembled in Factory workshops, checked and
dispatched ready for installation. Replacement products or components thereof should be ordered direct from
Factory Furniture Ltd.
Copyright
The design copyright for the product and drawing copyright remains the sole property of Factory Furniture Ltd.
General Specifications
Lounger
Metric
length 2025mm | width 800mm | height 775mm
Imperial
length 6’ 7½” | width 2’ 7½” | height 2’ 6½”
Approx Weight
133kg
Fixing Centres
420mm (1’ 4½”) x 400mm (1’ 3½”)
Detailed Material & Finish Specifications
Seat Slats
• Manufactured from FSC® certified tropical hardwood. 27 no. slats per lounger
• Profiled and left untreated as standard (oil or microporous woodstain treatment available
on request)
• Attached to upper frame with 4 no. fixing points per slat
Upper Frame
• Manufactured from stainless steel (satin polished finish) with all welded construction
Base Assembly
• Manufactured from stainless steel (satin polished finish) with all welded construction
• Fixed to upper frame with 4 no. M10 x 25mm csk bolts and locknuts
• Anchored to ground with 4 no. M10 x 150mm resin anchor studs and cap nuts
General Maintenance
(Recommended Schedule & Guidelines)
Daily/Weekly/Monthly
(or as adopted)
Visual checks of lounger slats, upper frame and base - check all items for superficial or physical damage.
Three Monthly
Clean all items as detailed below check all fixings are seated correctly; inspect timber for serious damage and
splinters.
Six Monthly
Secure all fixings; full clean as detailed below; check that lounger is firmly secured to the ground
Specific Maintenance Details
FSC Timber
Clean with a stiff brush once per year, especially in more exposed locations, in order to prevent a verdigris type
build up on the timber surface. Ideally this should be completed in early spring. During the cleaning stage, all
exposed timber surfaces should be inspected for splits and splinters. Any splinters and graffiti should be
removed and the surface sanded with 100 grit sandpaper in order to remove any uneven / sharp edges or
surfaces.
During the first few months after installation the tannin naturally occurring in the timber may leach out and
cause a brown staining on the bases. This may be removed with a light solution of household bleach and
water.
Stainless Steel
(polished stainless steel only)
Clean as required, but at least every three months, using a stainless steel polish and a lint free cloth. To remove
ground in dirt, a stainless steel finishing pad may be required.
2
TORD LOUNGER specification