&
5HVSRQVLEOH
)RUHVW0DQDJHPHQW
Introduction
Design
Design, shop drawings and development by Factory Furniture Ltd.
Manufacture
Factory Furniture manufactured components. Products are assembled in Factory workshops, checked and
dispatched ready for installation. Replacement products or components thereof should be ordered direct from
Factory Furniture Ltd.
Copyright
The design copyright for the product and drawing copyright remains the sole property of Factory Furniture Ltd.
General Specifications
Ribbon Twist Bench
Metric
length 3110mm | width 1200mm | height 545mm*
Imperial
length 10’ 2½” | width 3’ 11” | height 1’ 9½”
Approx Weight
285kg
Fixing Centres
2310mm (7’ 7”) x 650mm (2’ 1½”)
Ribbon Flat Bench
Metric
length 3110mm | width 1200mm | height 500mm*
Imperial
length 10’ 2½” | width 3’ 11” | height 1’ 7½”
Approx Weight
288kg
Fixing Centres
2310mm (7’ 7”) x 650mm (2’ 1½”)
Detailed Material & Finish Specifications
Bench Slats
• Manufactured from FSC
®
certified tropical hardwood
• Profiled and left untreated as standard
(oil or microporous woodstain treatment available
on request)
• Supported on frame -
attached with 2 no. fixing points each
Frame
• Manufactured from hot dipped galvanised mild steel with polyester powder coat finish
(powder coat colour
grey as standard or to customer specification).
Stainless steel with satin polished finish option available.
• Frame is an all welded construction
• 3 off bases anchored to frame using 4 no. fixing points each
• Bench is anchored to ground via bases using 2 no. zinc-coated M10 x 75mm sleeve anchors per base (6 no.
total).
General Maintenance
(Recommended Schedule & Guidelines)
Daily/Weekly/Monthly
(or as adopted)
Visual checks of bench slats and frame (if applicable) - check all items for superficial or physical damage.
Three Monthly
Clean all items as detailed below check all fixings are seated correctly; inspect timber for serious damage and
splinters.
Six Monthly
Secure all fixings; full clean as detailed below; check that bench is firmly secured to the ground
2
RIBBON specification