Factory Five Racing GTM Supercar, Инструкция по сборке, Страница: 22 / 764

13
www.factoryfive.com 508-291-3443
have documentation on the origin and sale price. Check the numbers twice. The VIN numbers are
located on the back of the engine block, on a flat spot between the heads and at the apex where the bell
housing meets the block. Some solvent or WD-40 can usually clean this area off enough to see the
numbers. The Serial numbers on the transmission are typically stamped on a flat spot on the bottom of
the housing near the middle of the transmission. Some G50’s have an 8 digit code (i.e.: 1987 G50),
while others have a 12 digit code (i.e.: 88-89). The first five digits in the serial number (see the table
above) are what you will need to reference what the transmission has for gears, 5 or 6 speeds, and what
model Porsche it came out of.
Here are some tips to follow when checking out running gear:
Corvette Parts
Examine the engine mounts. Some small splits in the rubber area of the mount are normal, but any
serious splitting should be avoided.
Check the engine mount brackets for damage since these are areas that can crack/bend.
The easiest way to avoid engine work is to buy a donor car with an engine that runs. Everyone will tell
you it runs, but it’s best to hear for yourself. Bring a battery with you since it is usually the first thing
that gets taken out. A battery also helps when some guy says, “Don’t worry it runs great, but since I
don’t have the battery you’ll have to trust me.” The Corvette is computer controlled and should run
well the first or second time it is turned over. If at all possible, put the car into the gear and drive it