background image

PILOT-OP-EN 

- 37 -

STANDARD WARRANTY POLICY

RPS Corporation warrants its Machines and Original Equipment Accessories to be free of manufacturer’s defects 
in materials or workmanship for the periods specifi ed below. Warranty will be granted at the sole discretion of RPS 
Corporation and is subject to fi nal claim and parts review by RPS Corporation and its vendors.  This policy is effective 
January 1, 2014 and is subject to change on production units at a future date.

   

COVERAGE, EXCLUSIONS AND LIMITATIONS:

BATTERY POWERED MACHINES:

 

PARTS:

   

36 months or 1,500 hours (Power On meter) 

 

LABOR:

  

12  months 

 

TRAVEL:

 

3 months (150 mile maximum)

 

POLY TANKS:

 

7 Years or 3,000 hours (Water must not exceed 135°F/57°C) 

 

 

 

Freight coverage for 3 Years under the parts section of warranty.

AC POWERED MACHINES:

 

FLOOR MACHINES:

 All EDGE and ORBITZ Models

 

 

PARTS:

  

1 Year

 

 

LABOR:

  

90  Days

 

 

MOTOR:  

2 Years(1,500 hour)

 

Z

ER

O

3

 WALL MOUNT/PORTABLE UNITS:

  PARTS:

  

6 Month

 BACKPACK 

VACUUMS:

 Unit Must be Shipped back to Factory (Pre-Paid Freight)

 

 

PARTS:

   

3 Years / Lifetime Housing Warranty / 7 Year Motor Warranty

 

 

LABOR:

  

3 Years

 CARPET 

SPOTTER/EXTRACTOR:

 Unit Must be Shipped back to Factory (Pre-Paid Freight)

 

 

PARTS:

   

3 Years / Lifetime Housing Warranty / 7 Year Motor Warranty

 

 

LABOR:

  

3 Years

NEW PARTS:

 

90 day warranty on OEM replacement parts (when installed by an authorized dealer)

VALIDITY:

 

Machine is serviced by Factory Authorized Personnel and a fully completed Machine Delivery Form (online or fax) is    

 

 

on record at RPS Corporation.

LIMITATION:

 

Warranty will begin on date of machine installation to end-user or 6 months after shipment from RPS Corporation to    

 

 

the distributor if unsold at that time.

This warranty includes all parts and original equipment accessories on the machine except 

normal wear items

.  

Some examples of these wear item exclusions are:

• 

EDGE/ORBITZ isolators (1,000 hours on average)

• 

EDGE/ORBITZ Grip Face

• 

Squeegee Blades, Wiper Blades, Skirts and Curtains.

• 

Caster Wheels, Squeegee Wheels and Bumpers.

• 

Lights (Strobe, Headlights, or Bulbs).

• 

Chains and Belts.

• 

Filters, Screens, and Vacuum Bags.

• 

Motor Brushes and/or commutator wear.

• 

Brooms, Brushes, Pads and Pad Retainers.

• Hoses 

and 

Tubing.

• 

Drive Tires, Foam Filled/Pneumatic Wheels, Tubes or Valve Stems.

• 

Rubber Floor Seals or Gaskets.

• 

Vacuum motors with evidence of moisture or debris intrusion or > 400 hours.

• 

Batteries (see below)

NOT COVERED:

 Routine maintenance, adjustments or parts damaged from abuse, neglect, improper use of the machine, or lack of 

scheduled “daily, weekly, monthly” maintenance in accordance with our published PM Sheets. 

BATTERIES:

 Warranted through the battery manufacturer for One Year (pro-rated) from the date of delivery. The battery manufacturer 

approves or denies the warranty coverage after their analysis.  Labor and Travel credit through RPS is applicable once a warranty defect 
has been confi rmed.
 

 

NOT COVERED:

  Damage from lack of maintenance/lack of water, use of a non-OEM charger, or use of non-distilled  

 

 water.

BATTERY TERMINALS:

 Battery terminals and cable connections are covered for 30 days from the shipment of the machine.     

(Battery terminals and cables should be inspected, cleaned and secured upon installation of the machine and then every 30    

 

days thereafter.)

V14.0807

Содержание Pilot 28'' DISK










































Отзывы: