Rear Panel Operations and Connections:
5. Bus Line In Jacks-
Connect an input source to the Bus Line In Jacks. Now select which
amplifier channels will broadcast the Bus Line In source by selecting either LEFT or RIGHT
Or AUX using the source selection switches provided on each amplifier channel.
6. Direct Input Source Jack-
Connect an input source to the Input Source Jack. Now select
IN using the source selection switch on the corresponding amplifier channel.
7. Line Out Jacks-
The Line Out Jacks route the source connected to the Line In Bus jacks
to the line output connectors. These jacks can be used in multiply ways. The most common
connection would be to add an additional V-1250 amplifier to expand your system to more zones.
These Jacks can also be used to connect the V-1250 to other amplifiers like receivers,
powered sub-woofers, music on hold inputs etc.
8. Power Cord-
Plug the supplied AC power cord in here. Only use the factory supplied power
cord with the V-1250.
www.factorelectronics.com
