ISO 9001 / ISO 14001 / OHSAS 18001
-
4
-
Operating procedures
After unpacking the unit for the first time, please charge the unit for at least 6 hours before
operation. This is absolutely necessary as the built-in rechargeable batteries might have been
discharged naturally due to long shipment and storage time, even though it has been fully
charged in the factory prior to shipment.
To operate this portable sound unit, switch on the main POWER switch. If the Battery low
indicator also glows, it means the batteries are weak and please recharge them.
The main POWER switch does NOT switch on the other devices as each of them has individual
Power/Volume control. To operate each of them, you must switch them on accordingly.
Operating the dynamic wired microphone
To use a cable microphone, simply plug it into the MIC IN socket. The mic socket accepts both
phone and Cannon jack. Rotate the dedicated volume control knob and master volume control,
amplified sound could be heard from the speaker when voice is spoken into the cable
microphone.
Operating the wireless microphone system
To operate the wireless system, just switch on the power/volume control on the module panel
and the matching transmitter. Please have the channel setting on both the transmitter and
receiver module being the same before operation. Please as well make sure that master
volume control is set to minimum level before turning the unit on, especially working on a
wireless version! Set the Master volume control to the mid position. Rotate the volume control
knob on receiver panel clockwise to the desired levels. When voice is spoken into the
microphone, amplified sound should be heard over the built-in speaker.
Voice Priority (Ducking) operation
Voice Priority operation is only necessary when Cassette tape or CD is playing. When the
Voice Priority switch is put to ON position, the ducking function will be activated. While the
music is playing, a voice input from either a Wired or Wireless
Microphone will temporary override and turn down the volume of the background music and
voice could be heard clearly.
Background music will return to its original setting when no audio input is entering the
microphone for a certain time. However, if the microphone is not switch off, the reentering of
music into the microphone will also activate the voice priority function. So, Voice priority is best
operated using microphones with on/off switch.
Battery Charging
Internally, the PRESENTER ONE contains 2 pcs of 12V/5AH maintenance free lead acid
battery, which has no memory effect.
When the batteries are weak, the battery low indicator LED will stay RED. To charge the
batteries, simply plug in the AC power supply, the charging process will start automatically.
While charging, the charging indicator will flash RED. When batteries are fully charged, the
charging indicator will stay GREEN.
