www.factorelectronics.com [email protected]
Projection Mounting:
Important:
All installation methods should be in accordance with the applicable section of the
National Electrical Code, ANSI/NFPA 70, and/or the National Fire Alarm Code ANSI/NFPA
72, as applicable. The wiring method and compartment should not interfere with the
operation of the speaker.
The VERSA-6.5 includes a fully adjustable ball-joint speaker mount. Angles can be
adjusted using an Allen type wrench.
1. Connect the speaker wire to the wire-in speaker push terminals and run the wire
through the wire channel.
2. Select the projection top and screw the projection top into the back plate of the
speaker. Make sure the speaker wire is directed through the wire channel.
3. Mount the speaker mount to a solid surface (walls, posts, ceiling) using heavy duty
screws. Always make sure the screws are set into a solid wood stud or solid material.
Never attach the speaker mount to drywall with drywall anchors. The surface behind the
drywall must be solid and capable of supporting the speaker and the mount.
4. Remove the threaded post on the speaker mount and attach this to the threaded
speaker mounting hole located close to the back of the speaker housing.
5. Attach the speaker to the mount and tighten.
6. Using an Allen type wrench loosen the Allen nut and adjust the angle of the speaker.
tighten the Allen nut.
Pendant top Speaker mount
Wire
Channel
In an effort to provide our customers with the latest advancements in technology, Factor Electronics Specifications are subject to change from time to
time without notice.
Contact Information
Factor Electronics 4159 McConnell Drive Burnaby B.C.Canada V5A-3J7 e-mail:
Web:
www.factorelectronics.com
Warranty
Factor Electronics products (VERSA-6.5) are warranted to be free from defects in workmanship and materials for a period of (3) years without charge
for parts or labor.This warranty applies only to the original owner. The owners responsibilities are to provide proof of purchase and transportation to
the dealer the unit was purchased from or transportation to FactorElectronics. This warranty does not apply to units that have been subject to misuse,
abuse, neglect or improper installation, and does not apply to repairs or alterations made by unauthorized persons. This warranty specifically
excludes responsibility for consequential damage. Retention of your original bill of sale is required to obtain service under the terms of this warranty.
