Factor Electronics HDBaseT, Руководство пользователя

Страница: 7 / 14

20
www.factorelectronics.com
HDBaseT-4x4Matrix
Factor Electronics
Input Page
You can set the Input Source priority (Force HDMI, Force HDBT, Auto HDMI or Auto HDBT), check
the current input source and check the HDMI/HDBT connected status.
Preset Page
There're several preset input/output settings to choose from.
5
www.factorelectronics.com
HDBaseT-4x4Matrix
Factor Electronics
9. DIP switches
–Used for global EDID settings
10. HDMI inputs 1 to 4 -- Connect HDMI sources
11. HDBT outputs 1 to 4 -- Connect via Cat6 to the remote baluns.
12. HDMI outputs 1 to4 -- Output to four displays, AVR etc.
13. IR extension receiver input -- 3.5mm stereo phone-jack, connects to the IR receiver cable to
receive the IR from the HDBaseT-4x4Matrix remote.
14. Power port -- Use the included 24V/3.5ADC adaptor to power the matrix.
Remote Control Description
Master Remote Control
Output and Input select
A. OUTPUT-X select INPUT-Y:
1. Press OUTPUT-X (X = outputs1 to 4 )

Press INPUT-Y ( Y = inputs 1 to 4 )
2. Press OUTPUT-X (X= outputs 1 to 4 )

press the left and right arrow buttons to select the
input.
B. All outputs select INPUT-Y: Press ALL button in zone OUTPUT

Press INPUT-Y button ( Y
means 1 to 4 of inputs ), then INPUT-Y switched to ALL OUTPUTS
C. Mirror all inputs and outputs (Ex. Input 1 to output 1, input 2 to output 2, etc): Press PTP button in
the Zone OUTPUT
EDID Set Up
A. Fixed EDID to INPUT-Y/ALL
Press 1080I/1080P/3D/4K

Press 2.0CH/5.1CH/7.1CH

INPUT-Y/ALL button in Zone INPUT
B. Copy EDID of OUTPUT-X to INPUT-Y/ALL
Press COPY button

Press OUTPUT-X button

Press INPUT-Y/ALL button