Facom BC1215, Инструкция по эксплуатации

Страница: 21 / 84

21
16. TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Battery connectors do
not spark when touched
together.
The charger is equipped with an
auto-start feature. It will not supply
current to the battery connectors
until a battery is properly
connected. The connectors will not
spark if touched together.
No problem; this is a normal
condition.
The charger will not turn on
when properly connected.
AC outlet is dead.
Poor electrical connection.
Check for open fuse or circuit
breaker supplying AC outlet.
Check power cord and extension
cord for loose fitting plug.
I cannot select a language
on the display.
Press the button for 5 seconds to
select a language:
(EN
→
DE
→
FR
→
ES
→
IT).
No problem; this is normal.
Green LED is lit and the
display shows
ANALYZING
BATTERY
.
The charger needs to check the
condition of the battery.
The green LED will be lit when the
charger is checking the condition
of the battery. This is normal.
Green LED is flashing and
the display shows
CHARGE
ABORTED - BAD BATTERY .
The capacity of the battery is too
large for the charger.
The battery voltage is still below
10V after 2 hours of charging.
You need a charger with a higher
amp rate.
Have the battery checked.
The display shows
CONNECT CLAMPS .
The clamps are not making a good
connection.
The fuse is bad. Ring connectors
only.
Check for poor connection at
battery and frame.
Replace the in-line fuse for the ring
connector.
The display shows
EXTERNAL BATTERY
VOLTAGE TOO HIGH .
The external battery voltage is more
than the unit with power supply
mode.
Replace the external battery.
Input ........................................................................................230V AC~50Hz, 2.5A / 1.8A
Output ...........................................................................................12V 15A / 12V 10A
Type D = 2 years. See the general conditions in the FACOM catalogue or the FACOM price list.
17. SPECIFICATIONS
18. LIMITED WARRANTY