Fac F250 VO, Инструкции по установке, эксплуатации, обслуживанию и техническому обслуживанию

Страница: 12 / 16

32
EN
8.1 - TROUBLESHOOTING
PROBLEM
• Difficulty in slicing;
excessive resistance
when the product is in
contact with the blade.
• Slices are of irregular
thickness.
• Slices come out as
“doorsteps”.
• Slices are empty in the
middle.
• Slices disintegrate into
several pieces; they are
not sliced cleanly.
PROBABLE CAUSE
• The blade is blunt.
• Product is overly mature
or too dry.
• Slicing begins with
product in contact with
the blade.
• The pusher fails to retain
the product correctly.
• The blade is blunt.
• The pusher fails to retain
the product correctly.
• The blade is blunt.
• The product is too soft
(not mature enough).
• The blade is blunt.
• Worn blade.
SOLUTION
• Sharpen the blade.
• Tenderise product
before slicing.
• Turn the flywheel
4/5 times before the
product touches the
blade.
• Reposition the pusher
in order to retain the
product correctly.
• Sharpen the blade.
• Reposition the pusher
in order to retain the
product correctly.
• Sharpen the blade.
• Press the pusher
harder.
• Sharpen the blade.
• Replace the blade
service@linda-lewis.co.uk