Fac F 300 TSV, Руководство по эксплуатации и обслуживанию

Страница: 29 / 62

26
4
5
6
7
8
3 2
Fig. 14
Fig. 15
7
11
3 2
EN
• Adjust the slice thickness with the knob (3).
Start the blade by pressng on the white or green button (1).
USING THE MACHINE
• Hold the handle (11) fixed to the
plate and start the alternate cutting
movement. The product progressing
towards the gauge plate occurs by
pushing towards the blade.
☞
When finished, return the thickness control knob (3) to ‘0’ and draw
the carriage back (7).
• Stop the blade by pressing the black or red button (2).
1
3
3
27
1
2
3
4
5
Fig. 16
3
3
EN
SLICER CLEANING
The machines have to be carefully cleaned at least once a day; if it is
necessary more frequently. After a shorter or longer period of inactivity
clean the slicer before use.
WARNING: Cutting hazard!
Use protective cut- and tear-resistant gloves and perform all
operations with extreme care.
PAY ATTENTION AT ALL TIMES!
7
.1 - Disassembling the machine for cleaning
• Disconnect the plug from the mains power supply.
Take to ‘0’ the adjustment knob of the gauge plate (3).
☞
• Remove the various components as described in the following paragraphs.