Fac F 250 E, Руководство по эксплуатации и обслуживанию

Страница: 8 / 80

6
EN
GENERAL WARNINGS
• Before plugging the appliance make sure that the data on the label
correspond to those of the electrical distribution network.
• The plate is on the bottom of the appliance.
• For your safety, it is recommended to power the device through a
circuit breaker (DRC) with trip current not exceeding 30 mA.
• In case of incompatibility between the socket and the plug of the
appliance, have the die-casted cord and plug replaced with another one
by an authorized dealer. In case of tampering the manufacturer cannot
be held responsible either for safety or for warranty. Alternatively have
the socket replaced with a suitable type by a qualified professional.
The latter, in particular, will also have to ensure that the section of the
socket cables is suitable for the power absorbed by the appliance.
In general it is not advisable to use adapters, multiple sockets and /
or extensions.
• Do not connect the appliance to the power supply via external timer
or remote control systems.
• The use of any electrical appliance requires the observance of some
basic rules. In particular:
- do not touch the appliance with wet hands
- do not use the appliance barefooted
- do not pull the power cord or the appliance itself to remove the plug
from the socket
- do not leave the appliance exposed to atmospheric agents (rain,
sun, etc.)
- do not move the appliance while it’s functioning.
- the appliance has not been designed to be used under rain and
must not be stored outdoor or in moist places.
• In case of failure and / or malfunction, turn it off and do not tamper it.
For repairs apply only to the manufacturer or to a service center
authorized by the same and require the use of genuine spare parts.
Failure to comply with the above may compromise the security of the
device.
7
EN
GENERAL WARNINGS
• If you decide not to use a device of this type any more, it must be
made inoperative by cutting the power cord after removing the plug
from the socket.
It is also recommended to make harmless those parts of the equipment
which may constitute a danger, especially for children who might use
an abandoned appliance for their games.
• To avoid dangerous overheating, it is recommended to extend the
power cord to its full length and to use the appliance as recommended
in “USING THE MACHINE”.
☞
During functioning, the outlet must be easily accessible in
case it’s necessary to disconnect the appliance. Do not place
the appliance under a power socket so that the cord doesn’t
interfere with the machine correct use.
• Do not leave the appliance plugged in unnecessarily. Unplug it from
the power supply when is not used.
• At the end of use always turn the appliance off and disconnect the
plug from the power socket.
• At the end of each use always perform an accurate cleaning of all the
parts in contact with food, as indicated in the item “Cleaning”.
• Do not block the openings, ventilation or heat dissipation slots.
• If the power cord of this appliance is damaged, it must be replaced
by a service center authorized by the manufacturer, as special tools
are required.
Before performing any operation, turn the appliance off
and disconnect the power plug from the power socket.
☞
Make sure the power cord does not protrude from he floor to
avoid that someone can pull it also inadvertently knocking
the appliance.