Trac bar installed for photo only, it must be removed prior to installation
Trac bar installed for photo only, it must be removed prior to installation
View of front side of axle looking to the rear of the Jeep
12. Once gusset kit has completely cooled, paint all bare metal
areas
13. Re-install the Trac Bar into the new mount with the original
hardware and the supplied FT157 Trac bar Bracket Sleeve.
SEE PHOTO BELOW.
Weld Here
14. Install rear tires and wheels. Torque lug nuts to wheel
manufacture’s specifications.
15. Recheck all nuts and bolts for proper torque specifications
before driving. Realign truck to factory specifications and
drive truck. Re-adjust headlights.
RETORQUE ALL NUTS, BOLTS AND LUGS AFTER 50 MILES AND PERIODICALLY THEREAFTER
.
Weld Here
Weld Here
FT157 Trac
Bar Sleeve
