
⚠
Use of controls or adjustments or performance of procedures other than those
specified herein may result in severe burn.
ELECTRICAL SAFETY
1.
If the Mendel needs to be adjusted or serviced, please alert staff member
immediately.
NEVER
attempt to make adjustments yourself or open the
electronics cabinet without staff supervision. You could seriously injure
yourself and the machine.
2.
The Mendel is sensitive to electrostatic discharge. Make sure you don't
have a static charge on you before touching any electrical component of
the printer. Touch a grounded object before operating or attempting any
adjustments.
3.
If opening Mendel cabinet for service, ensure that the power supply is
turned 'off' and the cord is disconnected.
IMPORTANT TIPS
1.
Do not attempt to change material color in the middle of an active print
session. Doing so may damage the Mendel.
2.
Avoid
touching any component of the printer in order to achieve the best
quality print.
Also be careful not to bump the extruder or filament spool as
it could cause the plastic to deposit unevenly.
3.
Keep this printer cool. If you suspect the printer is overheating, please
alert the staff immediately.