Filament 3D Printing (0.10$/g) 2 / 2
a)
Remove the print bed (glass surface) from the printer
platform.
b) Spray a
small amount
of adhesive on the print
bed’s
taped side
.
c)
Set the print bed on the platform and attach its 4 corners.
4. Preparing the Printer Platform
5. Starting the Print
a)
Select
with the front menu wheel.
b) Select your 3D model from the file list.
c)
Let the printer heat and print your model.
6. Removing the Print From the Print Bed
a)
Using a
spatula
, remove the print slowly, starting from a
corner. Some masking tape may be torn in the process.
b) Replace any torn masking tape with new one.
Thank you for cleaning the printing station once
your
project is finished.
