Fabit 43075H, Инструкция по эксплуатации

Страница: 1 / 5

- 1 -
http://www.fabit.cn
INTRODUCTION
Thank you for purchasing Fabit waste oil
Evacuation Unit.
The waste oil collecting and draining
machine manufactured by our company is
using Compressed air as Power source, it
’
s
suitable to use in the Workplace of
anti-explosion.

Our product is with excellent sealing
property, with reliable functions of collecting
and draining oil.

The extending rod has two joints for
adjust, much easier for operating.

Measuring cup is with strong
material and anti-corrosion.

The special design of eccentric oil
pan makes the scope of collecting machine
larger than before.

Attention: Please according to the
type of your car / Machinery / Equipment, to
choose the right Diameter of Probe tube
when you use the machine to drain oil
directly from the tank.
READ THIS INFORMATION
CAREFULLY BEFORE USE
Please retain this instruction manual for
future reference.
Your safety is important to us. Please read
and follow all instructions listed below.
Some of these instructions alert you to the
potential for personal injury.
“
Ca Cautions
”
throughout the manual advise
of potential practices or procedures
which may cause damage to your
equipment.
Make sure all operators have access to
adequate instructions about safe
operating and maintenance procedures.
Do not exceed the maximum oil
temperature of 120
℃
.
WASTE OIL EVACUATION SYSTEM 43075H