- 3 -
OPERATION OF DRAINING OIL
1. Turn on the ball valve Under the measuring
cup ,the oil will flow down from the cup into the oil
tank automatically.
2. Release the waste oil from the oil collecting
machine to the big collecting tank equipment.
1) Release oil automatically:
Turn on all the ball valves except the ball valve of the
elbow pipe, let the air get into the tank. Put the
elbow oil release pipe to the waste oil collecting tank
equipment, then turn on the ball valve of the oil tank
bottom, with the air pressure ,the waste oil will be
extracted into the collecting device.
(
Attention:
The exit of the elbow pipe should be
lower than the liquid lever of the oil tank.)
2) Release oil with air pressure:
Turn off the ball valve under the measuring cup and
turn off the ball valve under the extending rod. Put
the elbow oil release pipe to the waste oil collecting
tank equipment, turn on the ball valve of the oil
release pipe, collect 1Bar compressed air into the
tank, let the compressed air get into the tank, the
waste oil will be extracted to the collecting device
under the condition of air pressure.
When the air pressure of the tank is over 1bar, the
safety valve will open automatically, cut off the air
supply at this moment please.
Please hold the hook of oil release pipe tightly or fix it
during oil releasing.
PERIODICALLY CHECK
1.
Check before working :
Before working, please turn off all the ball valves, and
vacuumize the oil tank and measuring cup. Then carefully
check the indicator
’
s change of the vacuum meter, to see
whether any part of the machine is with air leak or not. If any
leakage, please contact the sales agent, to avoid any property
damage or personal injure accident.
Attention:
During vacuumizing, check the
indicator
’
s change of the vacuum flow meter
carefully. Cut off the compressed air supply when
the indicator reaches the red mark area, finish the
operation of vacuumizing.
2. Periodically check
1)Check for air leakage
2) Check for oil leakage
3) Please check if there is something wrong with
the soft pipe, metal joints and any other little
parts, i.e. damage, out of shape, wearing or blot
etc.
Attention:
About this part, suggest to establish
the complete check system with professional
workers. Please consult the sales agent for details.
3. Check after finishing work
When finishing working, please clean the surface
of the machine, (e.g. Water, blot, oil etc. )
Anything unusual ,please contact the sales agent
immediately.
4. Attentions of other issues
1) Attentions about the periodically check:
a) Please do it according to the operation
manual
’
s instructions carefully for checking before
work & periodically inspection .
b) It is not allowed to use this machine as other
purpose which has no relation to collecting waste
oil.
2) Attentions about using:
a) Do not make this machine close to fire or
corrosive liquid.
b) Do not exceed the normal pressure rang
during operations.
WASTE OIL EVACUATION SYSTEM
43075H
