FabiaTech FX5633, Руководство пользователя

Страница: 24 / 76

FabIATech Corporation
18
a1. JP2: RS-485 Terminator Setting
¾
b. JP3: Compact Flash Master/Slave Selection
¾
c. J1: Clear CMOS Setting
You can use J1 to clear CMOS data. The CMOS stores information like system
date, time, boot up device, password, IRQ… which are set up with the BIOS. To
clear the CMOS, set J1 to close and then open before system powers off. The
default setting is opened.
JP3
CF-Master
3
2
1
3
2
1
CF-Slave
Factory Preset
RS-485
Terminator
Disabled
Factory Preset
3
2
1
JP2
3
2
1
RS-485
Terminator
Enabled
Factory Preset
Clear CMOS Data
J1
2
1
2
1
Note: The Compact Flash socket supports 3.3V Compact Flash and Micro Drives.
The JP3 is used to select master/slave device of this socket and the default is
slave (close). Be sure not to set master/slave to the same IDE connector, if you
use CF and IDE hard disk simultaneously.