Version 1.1
FX5505 Series User’s Quick Reference
Page 2/2
www.fabiatech.com
©2007-2008 FabiaTech Corporation
C. CRT, TV-Out, and Audio Connectors
D. I/O Signals Connector (
10-pin 0.15” Terminal Block
)
6. Software Configuration and Driver Installation
Please refer to the driver installing documentaion in the included Compact Disc for installing what
device driver you need. If you need to change the system settings or configurations of I/O ports, Please
refer to User's Manual (also in the included Compact Disc) for details.
7. Installing Terminal Blocks and CF/PCMCIA Modules on FX5505x
8. Installing/Changing 2.5" HDD and RAM Module on FX5505x
Video-Out
(NTSC/PAL)
Line-Out
Line-In
CRT (D-sub 15)
Mic-In
Step 1
RA
M
Step 2
Step 3
Step 4
Step 5
Step 1-1: 2.5” HDD Installation
Step 5-1: DDR RAM Installation
Note 1: Digital inputs accept DC 12~24V
signal with isolated input.
Note 2: Digital outputs are active-low
open collector output, and can
drive up to 24V/500mA maximum.
Pin 1: Common of Digital Output for Inductor Loads
Pin 2: Digital Input #1
Pin 3: Digital Input #2
Pin 4: Digital Input #3
Pin 5: Digital Input #4
Pin 6: Common Ground of Digital Inputs and Outputs
Pin 7: Digital Output #1
Pin 8: Digital Output #2
Pin 9: Digital Output #3
Pin 10: Digital Output #4
1
10
Figure 1: Power Terminal Block Installation
Figure 3: CF Installation.
Figure 2: I/O Terminal Block Installation
Figure 4: PCMCIA Module Installation
CF
Figure 1
Figure 2
Figure 3
Figure 4
