FabiaTech Fanless FX5202 Скачать руководство пользователя страница 40

Страница: 40 / 65

FabiaTech Corporation

Chapter 4 Software Installation

The enclosed diskette includes FX5202 VGA, AUDIO driver and LAN driver. To install
and configure you FX5202 system, you need to perform the following steps.

VGA Drivers

WINDOWS XP Driver

To install the VGA driver, insert the CD ROM into the CD ROM device, and
enter DRIVER>VGA>Geode_LX>WINXP. If your system is not equipped

with a CD ROM device, copy the VGA driver from the CD ROM to a CF.

To install the VGA driver, insert the CD ROM into the CD ROM device, and
enter DRIVER>VGA>Geode_LX>WINXP. If your system is not equipped

with a CD ROM device, copy the VGA driver from the CD ROM to a CF.

Open Control Panel. [Start->Settings->Control Panel].

Click on System button> Select Hardware >click on Device Manager.

Click on Video Controller (VGA Compatible) >Update Driver>

Select

Specify a location >

Browse >

Select “lX_win” file from CF.

Click on Video Controller (VGA Compatible) >Update Driver>

Select

Specify a location >

Browse >

Select “lX_win” file from CF.

Click on OK >Next >Yes >Finish

In the WINDOWS-XP, you can find the <DISPLAYL> icon located in the

{CONTROL PANEL} group.

In the WINDOWS-XP, you can find the <DISPLAYL> icon located in the

{CONTROL PANEL} group.

Adjust the <Resolution> and <Color>,

LAN Utility & Driver

To install the LAN utility OR driver, insert the CD ROM into the CD ROM

device, and enter DRIVER>LAN>RTL8139C>DIAG. If your system is not
equipped with a CD ROM device, copy the LAN driver from the CD ROM

to CF.

To install the LAN utility OR driver, insert the CD ROM into the CD ROM

device, and enter DRIVER>LAN>RTL8139C>DIAG. If your system is not
equipped with a CD ROM device, copy the LAN driver from the CD ROM

to CF.

Execute install.exe file.

Note: In the RTL8139C directory, a HELPME.EXE file is included to provide installation

information.

Note: In the RTL8139C directory, a HELPME.EXE file is included to provide installation

information.

Содержание Fanless FX5202


































































Результаты поиска

Содержание Fanless FX5202

Отзывы:

Похожие инструкции для Fanless FX5202

Бренды по названию

Популярные бренды

FabiaTech Fanless FX5202, Руководство пользователя

Результаты поиска

Содержание Fanless FX5202

Отзывы:

Похожие инструкции для Fanless FX5202

Бренды по названию

Популярные бренды