Faber STRTIS36WHV, Руководство по установке, Страница: 34 / 116

34
CARING FOR FILTERS
CLEANING METAL GREASE FILTERS
These can be washed in the dishwasher, and need to be cleaned whenever the
S1 LED comes on or at least once every 2 months of use, or more frequently if
use is particularly intensive.
Resetting the Grease Filter Alarm
• Turn the Lights and the Hood off.
• Press
and hold for at least 3 seconds, until LED flashes three times in
confirmation.
Cleaning the Filters
• Open the Panel.
• Remove the Filters one at a time, pushing
them towards the back of the unit and
at the same time pulling downward.
• Wash the Filters without bending them,
and leave them to dry completely before
replacing. (If the surface of the filter
changes color as time goes by, this
will have absolutely no effect on the
efficiency of the filter itself.)
• Replace the grease filters, taking care
to ensure that the handle faces forward.
• Completely dry the filters before
reinstalling. Otherwise, left over grease
may heat and drip.
• Close the Panel.
REPLACING ACTIVATED CHARCOAL FILTER
They cannot be washed or regenerated, and must be changed when LED S1 starts
to flash, or at least once every 4 months. The Alarm signal, if it has been activated,
only appears when the Hood Blower is turned on.
Resetting the alarm signal
• Turn the Lights and the Hood Blower off.
• Press
and hold for at least 3
seconds, until LED flashes three times
in confirmation.
Cleaning the Filters
• Open the Panel.
• Remove the Metal Grease Filter.
• Remove the saturated Activated
Charcoal Filters, as indicated (B) .
Fit the new Filters, as indicated (A) .
• Replace the Metal grease filters.
• Close the Panel.
Caution: When used in recirculation mode,
To Reduce the Risk of Fire and Shock use
only conversion kit Model Required Activated Charcoal Filter Accessory - sku # -
FILTER1 or FILTER1LL (purchased separately).
A
B
1 1
2 2
3 3