UK/IRL
41
10. CONTROLLING THE APPLIANCE
10.1 Lighting the fire
If the main burner or pilot light are extinguished for any reason, d
do
o
n
no
ott a
atttte
em
mp
ptt tto
o rre
elliig
gh
htt tth
he
e p
piillo
ott w
wiitth
hiin
n 5
5 m
miin
nu
utte
ess.. Contact a qualified
installer when the appliance goes off regularly.
The control valve is behind the door or ash pan cover.
Open the door by pressing against the door at the bottom right.
(Silva only).
With control button A you can light the pilot. With the control button
B you can adjust the height of the flames (see fig. 19).
Knob A
The
{
is the OFF position preventing any gas from passing through the
control valve to either the pilot burner or to the main burner. By
pressing the knob in it is possible to turn it anticlockwise. The first
function is to turn on the gas to the pilot- this occurs just before
reaching the
|
position (if the fire has not been lit for some time it may
be necessary to hold the knob in this position for some seconds to
clear the air from the pipe and allow gas to reach the pilot burner).
fig. 19 control unit
A
B
UK/IRL
40
IIM
MP
PO
OR
RT
TA
AN
NT
T
A suitable Fireguard conforming to BS6539 and BS6778 should be used
with this appliance to protect children, the elderly or infirm. Care
should also be taken with pets.
In your own interest and that of safety, all gas appliances must be
installed by competent persons. Installation must be in accordance with
National Regulations. CORGI registered installers are required to work to
recognised standards.
N
No
otte
e:
Since the appliance is a source of heat, circulation of air occurs.
Therefore it is of importance that you do not use the appliance shortly
after a renovation of the home. Because of the natural circulation of air,
moist and volatile components from paint, building materials, carpet etc.
will be attracted. These components can settle themselves down onto
cold surfaces in the form of soot. As on all heat producing appliances,
soft furnishings such as blown vinyl wallpaper placed too near to the
appliance may become scorched or discoloured. This should be born in
mind when installing the appliance.
