Faber SERENE C11, Руководство по установке

Страница: 7 / 24

> > > > 6
UK IRL
3 Installation requirements
Note: Since the appliance is a source of heat, circulation of air occurs. Therefore it is of
importance that you do not use the appliance shortly after a renovation of the home. Due to
the natural circulation of air, moist and volatile components from paint, building materials,
carpet etc. will be attracted to the lit appliance. These components can settle onto cold
surfaces in the form of soot.
As on all heat producing appliances, soft furnishings such as blown vinyl wallpaper placed too
near the appliance may become scorched or discoloured. This should be born in mind when
installing the appliance.
3.1 False chimney breast
The appliance must be installed in an existing chimney breast or non combustible false
chimney breast. For the dimensions of the appliance, see appendix D.
Keep the following in mind:
•
do not place the appliance on combustible materials or carpets
•
all walls have to be made of non-combustible material (e.g. Promatec).
•
do not place the lintel, surround or marble stone directly onto the appliance. If
possible, apply a lintel made of cement or something similar.
•
always ventilate the space above the appliance. Use a Faber ventilation grid (see
appendix E)
•
to avoid cracking, the plaster has to dry for at least 1 day per millimetre plaster
•
to avoid discolouring the plaster has to be heat resistant to min. 100°C.
3.2 Flue requirements
The appliance is of the type C11/C31. The appliance will need to be supplied with the
approved Faber flue pipes and terminal, it is not possible to supply your own. The minimum
effective height of the flue system must be 1 meter.
Flue routing:
•
a horizontal extension with elbows is allowed for a maximum of 6 meters.
•
vertical max. 12 meters (without horizontal extensions only)
Determine with the help of appendix A, B and C if the desired routing is possible.
To establish this you will need to calculate:
•
The effective height (this is the real difference in height between the upper side of
the appliance and the terminal)
•
The total horizontal extension. This is the total horizontal flue length where: