PAGE 13
Flat roof installations
1. Locate the 11" diameter hole between rafters.
2. Build a sloping base or roof curb that will mount the remote blower at a
minimum pitch of 2 - 1/2". (See FIGURE 5 and 6)
3. Weatherproof the base as required with proper sealant.
4. Locate the base so that the remote blower’s vent aligns with the 11" diameter
hole and the blower sits evenly on the base with no gaps.
Note: Make sure that the discharge end of the remote blower faces away from the
direction of prevailing winds. (FIGURE 7)
5. Use dimensions from either FIGURE 2 or 3 to locate the 1-1/4"
diameter wiring hole.
CONTINUE WITH PART # 6 UNDER ROOF INSTALLATIONS
ON PAGE 10.
roof curb
prevailing
winds
Blower
exhaust
FIGURE 7
Содержание RB900
Страница 17: ...PAGE 17 Wiring Diagram ...
Страница 18: ...PAGE 18 ...
Страница 19: ...PAGE 19 ...
Страница 20: ...991 0625 963_01 200629 D00006970_00 ...