Faber MatriX 3326 Series, Инструкция по эксплуатации

Страница: 58 / 78

58
The GV60 Wall Switch Accessory Kit can be purchased separately as an option to
control the fireplace . The accessory kit includes a wall switch, a wall plate, and a
cable available in various lengths .
The following operations can be done from the wall switch:
• Turn the fireplace on and off .
• Increase and decrease the flame height .
The thermostat and programming functions are not available with the wall switch .
The fireplace receiver will respond to both the wall switch or remote commands,
regardless of what was used to originally turn the system on .
Combination with Wall Switch
1 . Remove the cable plugged in the wall switch harness connection (Image 1) and
replace with cable provided in wall switch accessory kit .
2 . Insert the MOLEX crimp terminal of the second thermocouple cable
(G60-ZCTCR . . .) into the open connector hole of the plug (see image 2) . Listen for
a ‟click” .
3 . Insert the insulated receptacle into the insulated 2nd thermocouple terminal .
4 . Insert the plug connector into the receiver (see image 3) .
Wall Switch - Optional
Image 2: Lock MOLEX crimp
terminal of the G60-ZCTCR . . .
cable inside connector hole of
the plug .
Image 3: Insert plug connector
into the receiver .
If you wish to install the wall switch option, you will need to purchase the GV60 Wall
Switch Accessory Kit, as well as the 2nd thermocouple cable (G60-ZCTCR...) from your
authorized gas fireplace dealer.
Image 1: Location of wall switch harness
connection indicated by arrow