Faber FORTE 90SS, Инструкция по эксплуатации

Страница: 11 / 14

11
3. For stainless steel hood, user may use stainless steel cleaner to clean the surface of the
hood. Please avoid the cleaning solution penetrate into the control panel. Do not leave the
cleaner on the hood too long as this may damage to the surface. Use soft towel to wipe off the
cleaning solution, gently rub off any stubborn spots. Use clean and dry soft towel to dry the
hood.
4. The user may buff up the stainless steel hood with stainless steel polish after cleaning.
5. Do not allow stains and dirt to accumulate on the hood casing.
6. Do not use ordinary steel wool or steel brushes as it may scratch off and damage the
surface. These scratches and damaged parts may cause rusting in long run.
7. Do not allow salt solutions, disinfectants, bleaches, or cleaning compounds to stick on the
stainless steel surface. Many of these compounds contain chemicals, which may be harmful to
the casing. To clean these compounds, rinse it with water and wipe it dry with a clean soft
cloth.
8. Do not use stainless steel cleaner on the control panel as it may spoil the surface of it or
discolor it.
Cleaning the grease filter (please wear the protective gloves before clean the cone filter)
1. The grease filters fitted by the factory are intended to filter out residue and grease from
cooking. It need not be replaced on a regular basis but are required to be kept clean
frequently and its easy disassemble without any tools needed.
2. The filters are recommended to be cleaned after every 20 hours of cooking(maybe varied
according to different cooking habits and frequency). If the cooking habit is very heavy which
involve a lot of deep frying and stir frying with lots of oil, the filter has to be cleaned more often
than the recommended basis.
3. To clean the filters, the user could soak it with warm soapy water for sometime and then
rinse it with clean water. The user could softly brush the filter with soapy water and clean cloth
as well and then rinse it clean water.
4. After rinse off the soapy solution, the user has to dry the filters before they could place back
to the cooker hood. The filters have to place back before it start operates again.
5. The damaged filter has to replace immediately, the filter could be purchase from our
authorised dealers.