Installation Method and requirement
The gas cooker should be put horizontally on the platform.
Procedures:
1. Take out the gas cooker from its package and check if any accessories missing.
2. Put the accessories such as pan support on to the gas cooker.
3. Turn the gas inlet (at the rear side of the gas cooker) to a proper angle, connect to the gas tube and fasten with tube
clamp (tube and clamp to be prepared by user).
4. Turn on the gas regulator and check the connection with detergent for
Requirement:
1. Surface of the installation platform must be made of concrete stuff or other flame retardant materials.
2. Ample space of at least 150mm must be left between the wall an the body of the gas cooker and a minimum 800mm
clearance above the gas cooker.
3. Gas tube should be 1~1.5 meter in length and should not touch the cooker body.
4. The gas cooler should be located no less than 1 meter away from gas tank.
Usage
Ignition
Turn on the gas supply, push down and turn the switch knob counter clockwise till a sound of’ click’ heard. The electro
spark will then ignite the gas from the ignition device. Meanwhile the burner lit. Then release the switch knob.
In event of the burner flames being accidentally extinguished, turn off the burner control and do not attempt to re-ignite
the burner for at least 1min.
Flame adjustment
Turn the switch knob to the position according to the fig illustrated below for the desired flame size.
Air adjustment
To obtain optimum combustion, gas should be mixed with proper proportion of air. Air plate for air incoming control is at
the air inlet of burner. When flame shows an abnormal combustion, turn the air plate to adjust the amount of air letting in until
the flame color becomes blue. (see fig below)
Warning
The size of vessel for these appliance is from 180mm to 240mm. Do not use the cooking vessels in the hotplate that
overlap its edges.
Caution: the use of a gas cooking appliance result in the production of heat, moisture and products of combustion.
Keep natural ventilation holes open or install a mechanical ventilation device(mechanical extractor hood)
Prolonged intensive use of the appliance may call for additional ventilation, for example opening of the window, or more
effective ventilation, for example increasing the level of mechanical ventilation where present.
Caution: this appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.
Caution: in case of hotplate glass breakage:
Shut immediately off all burners and any electrical heating element and isolate the appliance from the power supply.
Do not touch the appliance surface.
Do no use the appliance.
