Assembled the grinding cup
with the food onto the main
body, then plug in, turning
round the knob.
After finished the grinding,
adjust the knob switch to ‘0’
position, pull the plug. Detach
the grinder cup according to
diagram.
CLEAN AND CARE
•
After every use, wash movable parts of the Blender and Dry Mill with warm, soapy water.
•
The Blender container may be washed by putting water and a few drops of liquid detergent in it.
Place Blender Pitcher in the motor base then allows operating for about 10 seconds. Discard liquid
then rinse Blender container thoroughly.
•
Never immerse Blender motor in water. Clean the motor housing by wiping with a soft and damp
cloth.
•
Never use abrasive cleaning agents or any metallic and sharp objects (e.g. scrubbing brush or knife)
for cleaning.
•
Wipe dry all parts of the Blender using a soft and dry cloth.
•
Put back parts and accessories of the Blender to their proper places before operating again.
•
Store Blender in a cool, dry place after cleaning.
SERVICE
•
Do not operate your Blender if the unit malfunctions or appears damaged in any manner. Bring the
complete product to the place of purchase or to any authorized dealers for inspection, repair or
replacement.
•
Do not disassemble your Blender by yourself. No user serviceable parts inside. Refer all needed
repair to an authorized service facility ONLY.
Technical specifications
Mains voltage: AC220-240V 50/60Hz
Power: 300-327W
Short time operation: Max 1 min
Correct Disposal of this produc
t
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased.
