Faber e-MatriX heat 800/500 RD, Руководство по установке, Страница: 34 / 76

Installation manual e-MatriX heat 800/500 RD,ST (LL)
33 < < < <
Remote is not working. Low batteries.
Remote isn’t paired to receiver.
Distance to fire is too far. Place new batteries, see chapter 5 in user
manual.
Pair the remote control with the receiver,
see chapter 5 in the user manual.
Shortens the distance.
Large amount of smoke ap-
pears grey or colourless. Lamp failure. Replace circuit board with lamps.
57 e-MatriX will not operate,
the LED’s continuously to
blink three times. Water leak Press the mains switch of the Control box to
the “OFF” (0) position, see fig. 4.0-D. Check
all connections on water leakage and t
urn
the mains switch back in the “ON” (I) posi-
tion.
58 e-MatriX will not operate,
the LED’s continuously to
blink once every eight sec-
onds. Water level too high. Press the mains switch of the Control box to
the “OFF” (0) position, see fig. 4.0-D and call
for maintenance.