Faber Dimplex 510 I, Руководство пользователя

Страница: 4 / 11

Installation and user manual
3 < < < <

The operator must use the tools provided.
We recommend using protective gloves when
handling or using the appliance. Any glove
provided is considered a tool.

This appliance is only suitable for burning
wood logs. It is not suitable for burning other
fuels including treated wood, woodchips,
waste materials, carton or paper.

Burn only p r o p e r l y s e a s o n e d wood with
a low moisture content less than 20%.
Burning wet unseasoned timber will only result
in a build up of tar in the stove and the
chimney and will cause staining of the glass.

Do not burn petroleum coke fuels, household
waste or plastic in this appliance.

Never use flammable liquids to start up the
fire. Only use special ignition firelighters or
kindling wood. Avoid the use of aerosols in the
vicinity of the stove when it is in operation.

When lighting the fire for the first time, run for
several hours on the highest setting, so that
the paint can cure. During this period smoke
and an unpleasant smell may be generated.
Adequate ventilation must be provided by
opening windows and doors, so that any
fumes can disperse; we recommend vacating
the room during this process.

If with the first heating the maximum
temperature is not reached, the above-
mentioned effects may as well arise later on.

The doors in front of the fire must be closed
when the stove is running.

Ensure that the ashtray should be fully
inserted, and in particular never remove hot
ash from the fireplace (fire risk). Do not allow a
build up of ash to occur in the ash pan as this
will cause the grate to burn out prematurely.

Clean your chimney at least twice a year and
check the baffle plate monthly to ensure there
are no blockages.

Regular maintenance should be carried out by
a suitably qualified engineer.

If work is being carried out on flammable or
explosive materials in the vicinity of the stove,
the stove must be put out of operation.

If a chimney fire occurs, shut the air intake,
extinguish the fire with sand and contact the
fire department immediately.
3
Installation requirements
3.1 Fluepipe and terminal requirements

The chimney must be suited for the use of
wood burning cassettes.

Before installation check and clean the
chimney system.

The used chimney must be fully airtight.

Make sure that the chimney is accessible for
cleaning intervals.

Make sure that in the horizontal chimney
sections no soot particles can accumulate.

The diameter of the chimney must be at least
the same size as the flue spigot on top of the
cassette.

The minimum flue draught must be at least 12
Pa when having a warm chimney.

When having a too strong chimney draught a
damper must be used.

Mount the chimney system in such a way that
rainwater entry is prevented.

The chimney system cannot rest on the
cassette.
3.2 Terminals
Verify if the position of the terminal meets the
local
regulations regarding ventilation
openings.
3.3 General safety precautions
The following fire safety requirements must be met on
installations of the wood cassette:

Installation and maintenance can only be
done by qualified installers.

Install the wood cassette and fluepipes in
front of non-combustibles walls, minimum
distance to non-combustibles is 50mm.

Distance to combustible materials such as
curtains, furniture, etc. 1000mm
4
Preparation and installation
instructions
4.1 Mounting optional 3 sided trim
If desired an optional 3 sided trim can be mounted, see
par. 7.5 for more detailed information.
4.2 Self-closing door
The cassette has a self-closing door mechanism and if
needed this mechanism can be removed easily. See
par.7.6 for more details.
4.3 Optional convection air openings