Outdoor Lifestyles ODVILLA-36H Owner'S Manual Download

Page: 1 / 52

Owner’s Manual

Installation and Operation

DO NOT DISCARD THIS MANUAL

NOTICE

• Important operating

a n d m a i n t e n a n c e

instructions included.

• Leave this manual with

party responsible for

use and operation.

• Read, understand

and follow these

instructions for safe

i n s t a l l a t i o n a n d

operation.

DIS

Installation and service of this fi replace

should be performed by qualifi ed personnel.

Hearth & Home Technologies suggests NFI

certifi ed or factory-trained professionals, or

technicians supervised by an

NFI certifi ed professional.

Fire Risk

• For use with solid wood fuel or decorative

gas appliance only.

•

DO NOT

install unvented gas logs.

WARNING

If the information in these instruc-

tions is not followed exactly, a

fi re may result causing property

damage, personal injury, or death.

• Do not store or use gasoline or other fl am-

mable vapors and liquids in the vicinity of

this or any other appliance.

• Do not overfi re. Overfi ring will void your

warranty.

• Comply with all minimum clearances to

combustibles as specifi ed. Failure to

comply may cause house fi re.

WARNING

Hot screen/mesh and glass doors will cause burns.

•

DO NOT

touch screen/mesh or glass doors until

cooled

• NEVER allow children to touch screen/mesh or glass

doors

• Keep children away

• CAREFULLY SUPERVISE children in same room as

fi replace.

• Alert children and adults to hazards of high

temperatures.

High temperatures may ignite clothing or other

fl ammable materials.

• Keep clothing, furniture, draperies and other

fl ammable materials away.

HOT SURFACES!

Screen/mesh, glass doors

and other surfaces are hot

during operation AND cool

down.

Models:

Outdoor Woodburning Fireplace

ODVILLA-36H

ODVILLA-36T

ODVILLA-42H

ODVILLA-42T

Outdoor Lifestyles by Hearth & Home Technologies Inc.• 4072-137 Rev F • 11/25/13

Summary of Contents for ODVILLA-36H





















































Search results

Summary of Contents for ODVILLA-36H

Reviews:

Related manuals for ODVILLA-36H

Brands by name

Popular brands

Outdoor Lifestyles ODVILLA-36H, Owner'S Manual

Search results

Summary of Contents for ODVILLA-36H

Reviews:

Related manuals for ODVILLA-36H

Brands by name

Popular brands