manualshive.com logo in svg

Faber Concept III-700, Руководство по установке

Поделиться
Скачать
Faber Concept III-700 Скачать руководство пользователя страница 10

1 0

8 Instructions for client

• 

Recommend that the unit should be checked annually by a   

 

qualified specialist to ensure the safe use and to guarantee a  

 

long service life.

• 

Give advice and instructions on care and cleaning of the    

 

glass. Highlight the danger of burnt-in fingerprints.

• 

Instruct the customer on the operation of the unit and the    

 

remote control, including replacing the batteries and setting   

 

the receiver.

• 

Handover to customer:

 

- 

 Installation instructions 

 

- 

 User manual 

 

- 

 Wood set instruction card 

 

- 

 Suction Cups 

9 Annual maintenance 

9.1  

Checking and cleaning: 

• 

Check and clean if necessary after verification:

 

- 

The pilot light 

 

- 

The combustion chamber

 

- 

The glass 

 

- 

The ceramic logs for breakage. 

 

- 

The outlet. 

 

- 

Replace, if necessary:

 

- 

Chips/Embers. 

9.2  

Cleaning the glass 

Most deposits can be removed with a dry cloth. Clean the glass 

with a ceramic hob cleaner.

> 

Please note:

Avoid fingerprints on the glass. These are no longer removable 

after they are burnt in!

Now carry out check-up as described in Chapter 7 “Checking after 

installation”.

10 Conversion to other gas type

The conversion to a different gas type may only be performed by a 

qualified installer/dealer.

10.1 

Conversion from natural gas to propane 

   

(or vice versa) 

This can only be done by replacing the burner. To do so, please 

contact your dealer. 

Specify with your order always the type and serial number of the 

device.

 

 

I n s t a l l a t i o n   I n s t r u c t i o n s

Содержание Concept III-700





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды