Faber BREV368SS600, Руководство по установке

Страница: 49 / 60

49
BUTTON FUNCTION INDICATOR
WI-FI CONNECTIONS
Activate / Deactivate the Wi-Fi Connection
function.
A long Press of the speed 2 button with motor
and lights Off to activate / deactivate the WI-FI.
Note: the Wi-Fi function is automatically
activated when the user requests the Wi-Fi
configuration procedure.
Connection to
home wireless
router in
progress.
Wi-Fi connection
activated.
Starting the Wi-fi setup
A long press with the motor and lights Off
to Enter or End the Wi-Fi set-up procedure.
Before starting the procedure use the Faber
Cloud App to register with the IOT Faber
system. Then follow the instructions to add a
new device and register your home wireless
router.
If the procedure is not successfully completed
within a few minutes, stop the set up process
by holding the intensive button for 3 seconds.
Hold the button again for 3 seconds to start
the process. The hood will stop the Wi-fi set up
process if not successfully completed within 15
minutes.
Set Up is in
progress
F - LED
When setup is
finished LED’s
stay lit for 2
seconds.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired Operation.