background image

Version 12/04 - Page 9

1       2       3

1       2

1       2

L

M

V

• This rangehood uses 20 watt halogen lamps.

USE  AND  CARE  INFORMATION

This rangehood system is designed to remove smoke, cooking 

vapors and odors from the cooktop area.

Rangehood Control Panel

The control panel is located on top of the rangehood canopy.  

The position and function of each control button are indicated 

in 

FIGURE 15

.

Light On/Off Button ( L )

On/Off switch for the halogen  light.    Move the switch to "1" 

to turn the light ON and to "0" to turn it OFF.

Blower On/Off Button  ( M )

On/Off switch for the blower.    Move the switch to "1" to turn 

the blower ON and to "0" to turn it OFF.

Blower Speed Button ( V )

Speed control for blower.  Moving the switch to the 1 Position 

turns the blower on LOW.   Moving the switch to the 2 Position 

turns the blower on MEDIUM.  Moving the switch to the 3 Position 

turns the blower on HIGH.

For Best Results

Start the rangehood several minutes before cooking to develop 

proper airflow.  Allow the unit to operate for several minutes 

after cooking is complete to clear all smoke and odors from 

the kitchen.

Cleaning

The stainless steel grease filters should be cleaned frequently in 

hot detergent solution or washed in the dishwasher.   Stainless 

steel cleaner should be used on stainless rangehoods.  Abrasives 

and scouring agents can scratch stainless steel finishes and 

should not be used to clean finished surfaces.

Replacing the Lamps

Before attempting to replace the lamps, make sure that the 

light switch is turned off.  Remove the 2 screws 

(as indicated 

in FIGURE 16)

 that hold the light support and gently pull the 

support down from the hood.  Remove the lamp from the light 

support and replace with new lamp.  Replace the light support 

and fix it into place with the 2 screws. 

WARRANTY  &  SERVICE

All Faber products are warranteed against any defect in ma-

terials or workmanship for the original purchaser for a period 

of 1 year from the date of original purchase.  This warranty 

covers labor and replacement parts.  The warranty does not 

cover consumable parts such as filters and light bulbs.  This 

warranty does not apply if this product has been subjected to 

faulty installation, misuse, or neglect.  This warranty excludes 

any consequential expense or damage resulting from any use 

or malfunction of the product.  All implied warranties are limited 

to the duration of this warranty. 

To obtain warranty service, contact the dealer from whom you 

purchased the rangehood, or the local Faber distributor.  If you 

cannot identify a local Faber distributor, contact us at (508) 

358-5353 for the name of a distributor in your area.

WIRING  DIAGRAM

FIGURE 15

FIGURE 16

Содержание AXIA ISOLA










Отзывы: