INSTRUCTION BOOKL: PELLET STOVE FOR LOCAL AIR HEATING .
DESIGN INNOVATION SUSTAINABILITY FUNCTIONALITY HIGH PERFORMANCE
5/80
For correct installation and use of fab
appliances, you must follow the instructions
in this manual, respecting good practice
and national and local regulations, as well
as European Standards;
In the event of damage or loss of the
instruction manual, request a copy from the
equipment installer or directly from the
manufacturer, giving the equipment's serial
number;
No modifications should be made to the
appliance. Any alterations or modifications
to
the
original
components
will
immediately invalidates the guarantee. If
the appliance is used incorrectly, fab brand
will not accept any liability for damage or
loss;
During transport and installation, the
product must not be turned over or placed
in a horizontal position;
The appliance must be handled using
appropriate means and in compliance with
safety regulations;
Installation, repair and maintenance of the
appliance must be carried out by a
specialised, duly authorised technician;
During repair and maintenance operations,
the appliance's power supply must be
disconnected;
The appliance's power supply must be
earthed;
The electrical connections must comply
with the appliance's electrical diagram;
Children must not be allowed access to the
appliance;
Foreign objects must not be introduced into
the appliance, as this could result in
accidents and/or malfunctions;
Do not manually insert pellets directly into
the burner in order to encourage the stove
to light. To do this, use the LoAd function
(page 29);
In the event of non-ignition or power
failure, it is extremely necessary to empty
the burner;
If you notice abnormal flame behaviour,
never switch off the stove by unplugging it,
ALWAYS use the off button as indicated in
OFF- Extinguishing (page 54);
Ensure that there is adequate ventilation in
the room where the appliance is installed;
The appliance must be installed in a
ventilated indoor area, protected from
atmospheric agents, free from corrosive or
flammable substances;
Electrical and electronic components must
not come into contact with liquids, as this
could
result
in
accidents
and/or
malfunctions;
To clean the glass, you should wipe it with a
soft, slightly damp cloth when the machine
is at room temperature. No alcohol or
solvents may be used;
Ensure that the smoke exhaust chimney
connections are hermetically sealed with
high temperature resistant silicone;
The safety devices are intended to
eliminate the risk of harm to persons,
animals or objects. Their removal or
intervention by unskilled personnel may
compromised this protection;
GENERAL CAUTIONS
