INSTRUCTION BOOKL: PELLET STOVE FOR LOCAL AIR HEATING .
DESIGN INNOVATION SUSTAINABILITY FUNCTIONALITY HIGH PERFORMANCE
29/80
Local Room Temperature
The control panel allows you to program the
local room temperature you wish to reach
(reference temperature).
How
to
change
the
local
room
temperature?
To
modify
the
target
local
room
temperature value, with a few simple
touches, click on the P2 button
to
increase and, click on the P4 button
to
decrease. The target temperature value will
appear in the D4 area.
After a few seconds of waiting, the new
value is stored and the system returns to the
main screen.
In picture to the side we have the example
of the selection of 25ºC as the reference
temperature to reach.
Function LoAd
A-Pre-loading of pellets
It is important to ensure that the pellets load
on the burner. To do this, the LoAd function
must be used EXCESSLY on the following
occasions:
On the first start-up of the appliance,
after installation.
When, he forgot to load the pellet tank
and the stove completely used up all the
fuel.
Note!
Do not forget to load the pellet
tank beforehand.
P2
D4
P4
B- Removal of pellets from the auger
If you are not going to use the appliance for
some time, you should completely remove
all the pellets from the stove's feed system.
1-
Remove all the pellets from the pellet
tank;
2-
Use the LoAd function to remove any
pellets left on the auger.
Note!
Do not forget to remove the
pellets
from
the
tank
beforehand.
