Installation Instructions
Vengeance Light Mesh
For the Vengeance Front Bumper Line
Overview
Congratulations on your new purchase of the Vengeance Mesh Cover Accessory.
Your license plate bracket was designed in 3-D from digitized data, CNC laser cut,
fabricated, and powder coated… all in the U.S.A. Enjoy the fit and finish of a quality
Vengeance front bumper and Mesh Cover from Fab Fours, Inc.
WARNING:
This product was designed to be used with Fab Fours Vengeance front
bumpers ONLY.
I.
Tools Required
•
½” Wrench or socket
•
Socket wrench
•
3/16” Allen Wrench
II.
Mesh Cover Installation
Note: There are two different types of mounting methods used for Vengeance grill
mesh. One method uses the lighting mounting slots on the top of the light box. The
other method uses to same mounting points as what the light box uses to tighten to
the shell of the bumper. Both methods are detailed below, and example images
shown on the next page.
Note: the images below may not look exactly like your product as this manual is a
general grill mesh manual
1.
Using the provided
5/16” hardware, attach the Mesh Cover using the
provided holes in the light cutouts of the bumper. Adjust so that the
mesh is aligned with the cutout
2.
Remove the two bolts from the light box that are used to secure the
grill mesh to the back of the light box. Layer the mesh to the back of the
box and reinstall the appropriate hardware previously removed.
