7
1. Using a 10mm socket wrench, remove
the two (2) screws holding the grille to the
core support. (Figure 1)
2. Using a plastic body panel pry tool, remove
the push lock clip from the outer edge of
the grille on either side near the headlights.
To release these clips, lift up on the center
portion and then pull the whole clip upwards.
With the clips removed, pull firmly outward
on the grille shell and it should pop loose.
(Figure 2)
Figure 1
Figure 2
Disassembly
NOTE: Save all OEM parts until installation
is complete!
Figure 3
3. Using a 10mm socket wrench, remove the
nine (9) screws attaching the black plastic
valance to the lower portion of the bumper
cover on the outside. (Figure 3)
