11
Figure 14
Figure 13
Figure 15
15. Reverse the steps 1-8 to reinstall the
bumper and grill.
14. Take the OEM bumper and use 1” blue tape
to create a cutting line around the plastic insert.
On the lower face align the tape along the black
plastic insert. On the upper face align the tape
along the chamfered edge that surrounds the
insert. Cut along the outside edge of the blue
tape. (Figure 14-15)
13. Use a 17mm socket wrench to remove the
two bolts holding the passenger side tow hook.
(Figure13)
Installation
