Installation Instructions
Ford F150 Premium Front Bumper
Product Number: H4550, H4551, H4552
Application: 2018+ Ford F150
H455X_REV_A
Optional: If installing winch and roller fairlead into bumper, do it at this time.
Follow the winch manufacturer’s instructions for installation. If you are installing a
winch with a pulling capacity of 12,000 lbs., the front face mounting holes must be
used.
If not installing a winch, a license plate may be installed onto the front face of the
bumper.
IV. Front Bumper Installation
A.
Mount bracket to truck frame. Two bolts go through the bottom of
the frame and two go through the front face of the frame.
Figure 10a
B.
Mount bracket to bumper. With the help of at least two others, and
possibly a floor jack, to support the center of the bumper, lift the Fab
Fours bumper into place.
C.
Insert the set of stud plates from the inside facing out and tighten. Do
www.4x4ok.com
