Fab Fours CH20-E4951-1, Руководство по установке

Страница: 2 / 14

IMPORTANT SAFETY GUIDE |
Your safety and the safety of others is very important.
SAFETY PRECAUTIONS
In order to help you make informed
decisions about safety, we have provided
the following warnings, safety prec
ĂƵƟŽŶƐ͕
installa
ƟŽŶŝŶƐƚƌƵĐƟŽŶƐ͕ĂŶĚŽƚŚĞƌŝŵƉŽƌƚ
ant
informa
ƟŽŶƚ
o alert you to poten
ƟĂůŚĂnj
ards
that could hurt you or others.
Please do a job safety analysis before each
task to iden
ƟĨ
y poten
ƟĂůŚĂnj
ards for your
situa
ƟŽŶĂŶĚƌ
emove/protect against them.
Use own good judgment and take y
ŽƵƌƟŵĞ͘
• Failure to observe the following warnings
and ins
ƚƌƵĐƟŽŶƐƉƌ
ovided in this manual
could lead to severe injury and/or death.
• For professional installa
ƟŽŶŽŶůLJ
. Careless
installa
ƟŽŶĂŶĚͬ
or opera
ƟŽŶĐ
an result in
serious injury, death, and/or equipment
damage. All liability for installa
ƟŽŶĂŶĚƵƐĞ
rests with the user or consumer.
WARNINGS
• Always remove jewelry and wear eye
prot
ĞĐƟŽŶ͘
• Always use extreme c
ĂƵƟŽŶǁŚĞŶũĂĐŬŝŶŐ
up a vehicle for work. Set emergency brake
ĂŶĚƵƐĞƟƌ
e blocks. Locate and use the
vehicle manufacturers designat
ĞĚůŝŌŝŶŐ
points. Use jack stands.
• Always use appropriate and adequate care
ŝŶůŝŌŝŶŐĐ
omponents into place.
• Always ensure components will remain
secure during installa
ƟŽŶĂŶĚŽƉĞƌ
a
ƟŽŶ͘
• Always wear safety glasses when installing
this kit. A drilling opera
ƟŽŶǁŝůůĐ
ause
flying metal chips. Flying chips can cause
serious eye injury.
• Always use extreme c
ĂƵƟŽŶǁŚĞŶĚƌŝůůŝŶŐ
a vehicle. Always disconnect power before
welding. Thoroughly inspect the area to
be drilled (on both sides of material when
possible) prior to drilling, and relocate any
objects that may be damaged.
Check packaged materials immediately upon
arrival to ensure that all listed parts are included
and undamaged.
Read and understand all warnings, safety
ƉƌĞĐĂƵƟŽŶƐ͕ĂŶĚŝŶƐƚƌƵĐƟŽŶƐďĞĨŽƌĞŝŶƐƚĂůůŝŶŐ
ƚŚŝƐƉƌŽĚƵĐƚ͘
SENSORS FIELD OF VIEW MAY BE ALTERED WITH
USE OF THE REPLACEMENT BUMPER.
• Fab Fours, Inc. only approves installing this
product according t
ŽƚŚĞƐĞǁƌŝƩ
en ins
ƚƌƵĐƟŽŶƐ
with the hardware provided. Failure to install
according to these ins
ƚƌƵĐƟŽŶƐǁŝůůŝŶ
validate
the warranty. This includes, but is not limited
to, using alterna
Ɵǀ
e installa
ƟŽŶŵĞƚŚŽĚƐ͕
hardware, or materials.
• This product is for off road use only.
• Always use extreme c
ĂƵƟŽŶǁŚĞŶǁ
elding
a vehicle. Thoroughly inspect the area to
be welded (on both sides of material when
possible) prior to welding, and relocate any
objects that may be a fire hazard. When
welding in a cab, make sure the interior
surfaces are covered (e.g., welding blanket)
and a fire ex
ƟŶŐƵŝƐŚĞƌŝƐĂ
t hand.
• Always use extreme c
ĂƵƟŽŶǁŚĞŶĐƵƫŶŐĂŶĚ
ƚƌŝŵŵŝŶŐĚƵƌŝŶŐĮƫŶŐ͘
• Alway
ƐƟŐŚ
ten all nuts and bolts securely per
installa
ƟŽŶŝŶƐƚƌƵĐƟŽŶƐ͘
• Always route electrical cables carefully. Avoid
moving parts, components that become hot,
and rough or sharp edges.
• Always insulate and protect all exposed wiring
and electrical terminals.
• Perform r
ĞŐƵůĂƌŝŶƐƉĞĐƟŽŶƐĂŶĚŵĂŝŶ
tenance
on mounts and hardware.