18
6.
DESCRIPTION OF SYSTEM - ELECTRICAL
EQUIPMENT (standard system)
Fig. 3
MASTER-B
control board
SLAVE-B
control board
Key operated
push-button
Left-hand
DOMO
operator
Right-hand
DOMO
operator
Tx photocell
Rx Photocell
Receiver
12 Vdc flashing lamp
Fig. 4
Differential
thermal
breaker
Notes:
1)
To lay electric cables, use adequate rigid and/or flexible tubes.
2)
To avoid any kind of interference
always separate
low voltage
connection cables from 230Vac power cables.
3)
The transformer can be remotely located up to a distance of
100 m from the unit.
4)
See chpt. 7 for installation of boards enclosures.
Motor cable:
CANNOT BE MODIFIED
2 x 0.5
Connection BUS 2 x 0.5
3 x 1.5 (2 + T) for 230Vac
or
2 x 0.75 for 12Vac
(Remote transformer)
3 x 0.5
3 x 0.5
2 x 0.75
3 x 0.5
Motor cable:
CANNOT BE MODIFIED