![background image](http://html1.mh-extra.com/html/faac/e124s/e124s_translation-of-the-original-instructions_3060035007.webp)
1
E124S
5
532434 - Rev.A
3 E124S
1Y 11 03 19
Made in Ireland
Tr
ansla
tion of the orig
inal instruc
tions
ENGLISH
3. E124S
3.1 INTENDED USE
The E124S electronic board has been designed to
control one or two 24 V
"
actuators with brushed
motors having a maximum power of 70 W, for motor-
ized horizontal movement swing gates intended for
installation in areas that are accessible to people. Their
main purpose is to provide safe access for goods or
vehicles accompanied or driven by people in industrial,
commercial or residential settings.
!
Risks arising from installation and use of the product and
accessory devices have not been evaluated for motors not
manufactured by FAAC.
Any other use that is not expressly specified in these
instructions is prohibited and could affect the integrity
of the product and/or represent a source of danger.
3.2 LIMITATIONS OF USE
-
Do not use with motors where the technical data
shown on the rating plate are outside the limits
indicated in board instruction manual.
-
Using the product in any configuration other than
that intended by FAAC S.p.A.is prohibited. It is
prohibited to modify any of the product’s compo-
nents Do not install the board unless it is housed
in the enclosure supplied by FAAC.
3.3 UNAUTHORISED USE
-
Do not use on motors or devices that are intended
for purposes other than operating gates.
-
Uses other than the intended use are prohibited.
-
It is prohibited to install the E124S on smoke and/
or fire doors.
-
It is prohibited to install the E124S in environments
in which there is a risk of explosion and/or fire: the
presence of flammable gases or fumes is a serious
safety hazard (the product is not ATEX certified).
-
It is prohibited to power the system with energy
sources other than those specified.
-
It is prohibited to integrate commercial systems
and/or equipment other than those specified, or
use them for purposes not envisaged and author-
ised by the corresponding manufacturers.
-
It is prohibited to use and/or install accessories
which have not been specifically authorised by
FAAC S.p.A.
-
It is prohibited to use the E124S in the presence of
faults which could compromise safety.
-
Do not allow water jets of any type or size to come
into direct contact with the E124S.
-
Do not expose the E124S to corrosive chemical or
environmental agents.
date of construction
(day/month/year)
update index
identification code
3.4 PRODUCT IDENTIFICATION
The board is identified by the label (see
figure).