FAAC DAAB DB402, Инструкция по эксплуатации

Страница: 11 / 14

INSTRUCTION MANUAL DAAB VEHICLE DETECTOR DB402
Revision 7 11
Vehicle loop 2
Note that the display of the d-channels is determined by the setting in C702 for EP105
No. Name Range Factory Setting
d200 Vehicle loop 2 0 - 1 0
0 Disabled
1 Enabled
d201 Loop reading x1 000 - 999
d202 Loop reading x1000 00 - 99
d203 Activation from passing vehicle 000 - 999
d210 Detection limit for a vehicle in the loop 05 - 99 15
d211 Difference between on and off in the loop 00 - 50 03
d220 Loop presence reset 000 and 005-240
minutes
120
d221 Fast loop presence reset 00-99 seconds 00
d231 Compensation for activation from door half motor 1 on the
loop in the closed position
00 - 50 03
d232 Compensation for activation from door half motor 2 on the
loop in the closed position
00 - 50 03
d240 Safety function in closing movement 0 - 4 1
0 Disabled
1 Reverse
2 Stop with automatic restart of automatic closing
3 Stop without automatic restart of automatic closing, wait for new control signal
4 Safety only in open position. Used when the gate passes over the loop in the closing movement.
d241 Safety during run-on time or disengagement angle in closing
movement.
0 - 1 1
0 Disabled
1 Activated according to d240
d242 Safety function in opening movement 0 - 4 0
0 Disabled
1 Reverse to fully closed
2 Stop with automatic restart of automatic closing
3 Stop without automatic restart of automatic closing, wait for new control signal
4 Safety only in closed position. Used when the gate passes over the loop in the opening movement.
d251 Loop closing 0 - 1 0
0 Disabled
1 Enabled
d254 Type of closing with loop 1 - 2 2
1 Close immediately when loop is clear
2 Open fully first, then close