AIRSLIDE
7
532225 - Rev.A
Tr
ansla
tion of the original instruc
tions
ENGLISH
1.2 MEANING OF THE SYMBOLS USED
!
Perform the operations and steps described in compliance with safety
regulations and the instructions provided so as to prevent the risks
indicated by the symbols in the following tables.
2
Symbols: tools (type and size)
6-8...
HEX WRENCH of the specified size (6, 8...)
6-8...
ALLEN KEY with ROUND HEAD of the specified size (6, 8...)
TORX WRENCH of the specified size (6, 8...)
6-8...
CROSS-HEAD SCREWDRIVER of the specified size (6, 8...)
6-8...
METAL DRILL BITS of the specified size (6, 8...)
6-8...
MASONRY DRILL BITS of the specified size (6, 8...)
LEVEL
45°...
COUNTERSINK with specified angle (45°...)
ROUND SAW
PALLET FORKS
TOOL with TORQUE ADJUSTMENT
It indicates that a tool with torque adjustment is required where necessary
for safety reasons.
FASTENING TORQUE VALUE
The torque wrench and the fastening torque in Nm is specified in the
figures. E.g.: HEX WRENCH 6 set at 2.5 Nm
2.5
2.5
Nm
1
Symbols: notes and warnings on the instructions
!
CAUTION
It indicates the risk of personal injury or damage to parts. The described
operation/step must be carried out in compliance with the instructions
provided and with safety regulations.
F
WARNING ELECTRIC SHOCK HAZARD
Indicates risk of electrocution. The described operation/step must be
carried out in compliance with the instructions provided and with safety
regulations.
WARNING
Details and specifications to be followed with the utmost attention, in
order to ensure correct operation of the system.
PAGE REFERENCE
It refers to the page indicated by the number for details or clarifications.
PICTURE REFERENCE
It refers to the picture indicated by the number.
TABLE REFERENCE
It refers to the table indicated by the number.
Li
CAUTION
The batteries and electronic components must not be disposed of with
household waste but delivered to authorised disposal and recycling
centres.