9
71.5
84
360
390
90
90
L
A = L-450
L
ENGLISH
NB.: Dimensions are in mm.
Fig. 25
Fig. 24
Fig. 22
Fig. 23
Fig. 21
To position the fork support foundation plate, refer to fig.
where:
P1
= barrier foundation plate
P2
= fork support foundation plate
L
= beam length (in mm)
A
= Distance between foundation plates
SKIRT KIT
The skirt kit increases visibility of the beam.
It is available in lengths m and m.
IMPORTANT: If a skirt kit is installed, the balancing spring must
be adapted if possible.
The articulation kit makes it possible to articulate the rigid beam
to a maximum ceiling height of . m.
IMPORTANT: If the articulated kit is installed, the balancing spring
must be adapted if possible
.
END FOOT
The end foot allows the beam to rest when closed and thus
prevents the profile bending downward.
IMPORTANT: If a foot is installed, the balancing spring must be
adapted if possible.
FORK SUPPORT
The fork has two functions:
-
it prevents the beam, when closed, from bending and splitting
if its end is stressed by extraneous forces.
-
it allows the beam to rest when closed and thus prevents the
profile bending downward
11 AVAILABLE ACCESSORIES
ANTI-VANDAL VALVE (Fig. 20a)
It protects the hydraulic system if the beam is forced.
AUTOMATIC EMERGENCY RELEASE (Fig. 20b)
During a power cut, the automatic emergency release allows
you to manually lift the beam without accessing the release lever
of the hydraulic control unit. A hydraulic system guarantees that
the beam is stopped in opening position.
Fig. 20b
Fig. 20a
ARTICULATION KIT (mod. 6
3
0 only)
6
3
0
+
6
3
0
A = L-240