FAA Approved Installation Manual for the EDM-960 system
Report No 909
Primary Engine Data Management System
Page 24 of 45 Rev C
Date 12-12-12
8.
Tap
TABLE
. You see ‘
Fuel Table Data
’ ( White at top of screen) with a table. You may change any of the fuel
levels in the left column except for empty. You will enter the readings taken previously on paper into the right
column.
9.
Tap/hold
STEP
to select the cell you want to edit. Tap
EDIT
to change the value. Tap or hold
Modify
to change
digit. Tap digit to change another part of the number.
10. Tap
SAVE
to record it. Follow the on-screen menus to edit the value. Repeat previous step until all tanks data have
been entered.
11. You see ‘
Save fuel tank data?
’. Answer
SAVE
to store all final data values or
CANCEL
to return to table editing.
To complete the process, tap
SAVE
a second time.
25. GPS Interface
The GPS is wired to the EDM-960 head. See ‘Section’ for wiring reference. Refer to the Manufactures GPS manual
for the required pin connections on the GPS.
